GEBE Academy

Les cours de formation sont aussi variés que vos besoins, qu’il s’agisse de sessions techniques complètes en tête-à-tête pour la gestion des produits et des catégories ou de sessions en classe pour les équipes de vente :

  • Fonction et application
  • Contexte technique et complexité
  • Argumentaire sur la valeur et les produits phares

Veuillez contacter votre représentant de compte pour votre session individuelle.

Afin de rendre le savoir-faire de base sur les produits facilement accessible à vous et à vos clients, nous avons lancé la chaîne Youtube de la GEBE Academy.

En plus d’une longue feuille de route de sessions planifiées, nous sommes toujours heureux de donner la priorité et de vous aider avec des visuels pour vos introductions sur le marché.

Faites-nous savoir quels produits vous souhaitez voir, discuter et partager avec votre équipe et vos clients.

The installation of a high-pressure pump

« A high-pressure pump must be installed in a workshop, because if it is installed incorrectly, it can easily lead to chipping in the fuel flow and consequently, in the worst case, engine damage. » This is the opinion of Benni Maier, owner of Autotechnik Maier, a car repair workshop and a GEBE test center. We let him guide us through the installation of a GEBE high-pressure pump and are pleased to be able to share this with you.

As a rule, no special tools are required for the professional installation of a GEBE high-pressure pump. The removal and installation varies from vehicle to vehicle. Let’s now move on to the removal of the old high pressure pump, and the installation of the new one.

After the high-pressure fuel pump has been removed according to the manufacturer’s instructions, the battery negative terminal is disconnected to prevent the electric fuel pump from starting.

Now, according to the manufacturer’s instructions, remove all attachments to get access to the high pressure pump. Remove the electrical connector here.

Next, remove the high-pressure fuel line and low-pressure fuel line. Open connections are to be closed here.  Loosen each screw alternately by half a turn to prevent the high-pressure pump from jamming.

Now you can remove the high-pressure pump

The tappet is now removed from the cylinder head. The gasket holes are cleaned and inspected for damage.

When attaching the pump, make sure that it does not tilt. First tighten the screws by hand, then tighten them alternately by half a turn each. (The correct torque can be found in the vehicle manufacturer’s documentation).

Now mount the high-pressure fuel line and the low-pressure line, as well as all add-on parts. Reconnect the battery negative terminal.

Switch on the ignition and check for fuel leakage in the engine compartment. Now start the engine and check again. A subsequent test drive is recommended.

Due to the improved valve design, the GEBE high pressure pump achieves at least the mileage of the OE equipment.

If you want to know more about our high pressure pumps or our GEBE Test Center, feel free to contact us.

Stay safe! Your team from IKA-Germany .

The YouTube series by GEBE

Episode 1: Relais (German)
Episode 2: EGR-Valves (English)
We really recommend watching the series. No matter if you only want to inform you about the product or even need help. Furthermore we will of course  always be there for you, so feel free to contact us.